Press Fit
|
|
|
Additional Sizes, and Now Also Available in Stainless Steel!
FEATURES: Use with L Pins, T Pins, Shoulder Pins, or Ball Lock Clamps to align two holes without binding. Precision bushing with a tight tolerance in one direction and full relief in the perpendicular direction. Made in USA.
SIZES (STEEL): Available for the following pin diameters — see Dimensions page for part numbers:| | 1/8 | | — | | | #30 | | — | | | 5/32 | | — | | | 3/16 | | 5mm | | | #11 | | — | | | #10 | | — | | | #9 | | — | | | 7/32 | | — | | | 1/4 | | 6mm | | | F | | — | | | 9/32 | | — | | | 5/16 | | 8mm | | | 3/8 | | 10mm | | | 1/2 | | 12mm | | | 5/8 | | 16mm | | | 3/4 | | 20mm | | | 7/8 | | — | | | 1" | | 25mm |
SIZES (STAINLESS): Available for the following pin diameters — see Dimensions page for part numbers:| | 3/16 | | — | | | 1/4 | | 6mm | | | 5/16 | | 8mm | | | 3/8 | | 10mm | | | 1/2 | | 12mm | | | 5/8 | | 16mm | | | 3/4 | | 20mm |
INSTALLATION: To install, first drill and ream hole for roll pin (furnished), then bore large bushing hole for .0003-.0005" press fit. Press in bushing and roll pin simultaneously for accurate orientation.
MATERIAL (STEEL): Bushing > Tool steel, heat treated Rc 58-62, black oxide finish. Roll pin > Spring steel.
MATERIAL (STAINLESS): Bushing > 440C stainless steel, heat treated. Roll pin > 300-series stainless steel. |
|
