Flat
Carbide Tipped
|
Flat
Hardened Steel
|
Flat
Delrin®
|
Tapped Round Grippers can be either fastened from behind with a socket-head cap screw, or clamped with a set screw on the O.D. locking flat. (Steel and Delrin® flat pads do not have a locking flat.)
|
|
|
Now Also Available in Metric!
FEATURES: Flat Round Grippers are hard, replaceable inserts used to provide additional wear resistance when installed in a fixture. Carbide-tipped grippers are the most durable, hardened steel grippers are the most economical and impact resistant, while Delrin® grippers avoid marring finished workpieces.
SIZES: All three types of flat-face Round Grippers are available in the following diameters — see Dimensions page for part numbers:| | 3/8 | | 10mm | | | 1/2 | | 12mm | | | 5/8 | | 16mm | | | 3/4 | | 20mm | | | 1" | | 25mm |
INSTALLATION: These tapped Round Grippers can be fastened from behind with a socket-head cap screw, or clamped with a setscrew on the O.D. locking flat (hardened steel and Delrin® grippers do not have a locking flat). Grippers can be recess-mounted in a flat-bottom hole, or surface mounted to use as a rest pad. Tapped Round Grippers can also be installed in Gripper Swivel Pads and Gripper Swivel Contact Bolts.
MATERIAL (CARBIDE TIPPED): Alloy steel, heat treated, with brazed carbide insert, black oxide finish.
MATERIAL (STEEL): 8620 steel, carburized-hardened, black oxide finish.
MATERIAL (DELRIN®): White Delrin® 500 |
|
